
HomeownerNovember 16, 2026 · 7 min read
How to Set a Minimum Price (Floor) for Your Airbnb
Table of Contents
A midweek night in the quiet season books at a rate that looked fine on the calendar. Then the cleaner invoice arrives, the heat or hot tub ran all stay, and Airbnb takes its cut. That night paid you less than leaving the house empty would have.
The other version is just as common. The floor was set high enough to cover the mortgage if every night booked at that rate, and those midweeks never moved.
Your Airbnb floor is the lowest nightly rate you will still take when the other option is an empty night. Build it from the cost of one stay (cleaning, linens, supplies, extra utilities, and platform fees), then check it against what similar homes actually booked for in your slowest weeks. Enter it in your pricing tool, then check discounts so the guest price cannot slip under it.
This post is about that number, not the whole dynamic pricing setup. For how rates should move above the floor, see our guide to Airbnb dynamic pricing. Already have a minimum entered? Check whether it still matches what it costs you to turn the home.
What number actually belongs in the minimum price field?
The number that belongs in the minimum price field is the walk away price for one stay, not the rate that has to cover the mortgage for the month. The useful number is narrower: what does it cost you, extra, because this stay happened?
- Where most floors go wrong: Some hosts drop the minimum until almost any booking looks acceptable. Others load every monthly bill into it, then wonder why midweek nights never move.
- Occupied night costs: Include the cleaner, linens, consumables, extra utilities, a share of wear, and platform fees. These belong in the floor because they show up only when a guest is in the home.
- Always on costs: Leave out mortgage or rent, insurance, HOA dues, internet, and the base utility bill. These are due whether the night books or not, so they belong in your monthly average, not in the lowest rate you will accept for one stay.
- The mortgage mistake: If you put the mortgage into the floor, you are asking the slowest night of the year to do a job it cannot do.
- A guardrail, not a target: The floor is not a target, and it is not your average daily rate. A healthy calendar should spend most nights above it.
How do you build that number from a real turnover?
Start from what you pay to turn the home, not from a default percentage in a pricing tool. The tool does not know your cleaner rate, and a generic cost setting is not a calculation.
Not every property expense belongs in the floor in the same way.
Cleaning and turnover costs
Use what you actually pay for cleaning, laundry, linens, and the other prep between stays. That amount is not always the same as the cleaning fee you charge the guest.
In coastal homes, summer turnover volume is often the bigger swing, because the house is being cleaned over and over in a short season.
Guest supplies and consumables
Include soap, paper goods, coffee, and the other items you restock after a stay.
Additional utilities
Add the heat, air conditioning, or hot tub use that runs because someone was in the home. In mountain homes, winter heat and hot tub use can move the occupied night cost more than the cleaner does.
Wear and tear
Set aside a small share of the wear that comes with having guests in the house.
Platform and booking fees
Account for the service fee on the nightly rate and on any fees the guest pays you, including cleaning. Airbnb is moving hosts to a single service fee, and Airbnb's official service fee page says most hosts on that structure pay 15.5%, taken from the nightly price and any host added fees such as cleaning. Some listings still use a different structure. Confirm the rate your listing actually pays before you lock a number.
How do you turn those costs into a nightly floor?
Once you have those pieces, you can turn them into a nightly floor. The same turnover costs more per night on a short stay than on a longer one, because you still clean the house either way. If you allow one night bookings, your floor has to work for a one night stay. If your minimum stay is two nights, you can spread the turnover across two nights, and the per night floor comes down.
The next figures are an illustrative calculation, not a quote from a Leisr Stays home and not a recommended rate for your listing. Say a two night midweek stay costs you this, before Airbnb takes its cut:
| Occupied night cost | Amount |
|---|---|
| Cleaner and linens | $175 |
| Consumables | $25 |
| Extra winter heat and hot tub use | $40 |
| Wear | $20 |
| Total before the platform fee | $260, or $130 a night |
If you also charge the guest a $175 cleaning fee, that fee does not cover a $175 clean. After a 15.5% service fee, $175 becomes about $148 in your pocket. You are already $27 short on the clean, before utilities or supplies.
Here is how that same stay splits, depending on the shortest stay you allow:
| Two night stay | One night stay | |
|---|---|---|
| Occupied night costs | $260 | $260 |
| Cleaning fee charged to the guest | $175 | $175 |
| Guest total needed to clear $260 after a 15.5% fee (nightly rate plus cleaning fee) | about $308 | about $308 |
| Nightly floor | $67 | $133 |
The one night floor is higher because the turnover is no longer split. Floors are rounded up to the next dollar. Use your actual cleaner rate, your actual fee, and the shortest stay you allow.
You can run the same math on your own listing in four steps:
- Add up the occupied night costs for one turnover, using what you actually pay.
- Write down the cleaning fee you charge the guest, if you charge one.
- Divide the total you need to clear by (1 minus your host service fee). If your listing pays 15.5%, divide by 0.845. Confirm the rate your listing actually pays on Airbnb's fee page.
- Subtract the cleaning fee the guest pays, then divide what is left by the shortest stay you allow. That per night number is the floor to enter.
How do you know that floor will still book in a slow week?
After the cost floor is set, check it against what similar homes actually booked for in your quietest stretch, not against listed rates. Listed rates are asking prices. Booked rates are what guests paid, and that booked number is the one that tells you whether your floor can still clear in a slow week.
A few signs will tell you whether the number needs another look:
- Floor above the market: If your cost floor already sits above what those homes booked for in a slow week, the setting in the tool is not the first problem. Look at your costs, your stay rules, or the listing itself.
- Calendar sitting on the floor: If most of the next few weeks are sitting on the floor and nothing is booking, the floor may be doing the job of a base price. A guardrail the calendar never leaves is no longer a guardrail. It is the rate.
Where do you enter the floor, and why can the guest still pay less?
Entering the number is the easy part. Keeping the guest from paying less than that number is the part hosts miss.
How to enter the floor in Airbnb Smart Pricing
If you use Airbnb Smart Pricing, enter the minimum and maximum on desktop this way:
- Open Calendar and select the listing.
- Click Pricing.
- Enter a minimum and a maximum.
- Click Save.
Airbnb's Smart Pricing help page walks through that path.
If you use a third party pricing tool, that tool's minimum is the one that counts, and Airbnb Smart Pricing should be off. Our dynamic pricing guide covers the difference.
Why the guest can still pay less than the minimum
The number in the field is not always the price you collect. A few common settings can undercut it:
- Early bird discounts: Airbnb says that if you add a discount, such as an early bird discount, the price guests pay may go below the Smart Pricing minimum you set for those nights.
- Weekly, monthly, and trip length discounts: These can override Smart Pricing altogether.
- Custom date overrides: A manual price in a pricing tool can ignore the min.
Before you save a discount, check the stacked price, then the price after the platform fee. This is what a 20% early bird discount does to a $100 minimum, and you still pay the service fee on the discounted price:
| Tool minimum | With 20% off | After service fee |
|---|---|---|
| $100 | $80 | Less than $80 |
The tool minimum is not a promise if a discount can still cut under it. Do not treat a tool default as the floor. The default does not know what you pay your cleaner.
What to do if a booking came in below your minimum
If a booking came in below your intended minimum, work backward:
- Check whether a discount or a custom override applied to those nights.
- Look at the guest total, not just the nightly rate, then subtract the platform fee.
- Compare what you collected with the occupied night cost of that stay.
What should you watch after you set it?
Watch how many open nights are sitting on the floor. That is the fastest way to see whether the number is still doing its job. Revisit the floor when something real has changed, not every few days.
- Operating costs: Cleaner or utility costs have gone up or down.
- A new season: Demand and occupied night costs are not the same in January as they are in July.
- The calendar is stuck: Nights are full at the floor, or empty because of it.
- One year round floor: Usually the wrong compromise. A mountain weekend market and a beach summer often need a higher floor on peak dates and a lower one on slow midweeks. The lower one should never drop below the walk away cost of the shortest stay you allow.
How Leisr Stays approaches the floor
We set a floor for every home we manage, and a person checks what the tool suggests before it shapes the calendar. Tools are fast. They cannot see a new cleaner rate, a hotter than usual January, or a midweek that should stay empty rather than book at a loss.
If your slow nights are either empty or too cheap, talk with Leisr Stays about the floor on your specific home. We manage homes in markets like Asheville. Some owners also weigh managing it yourself against hiring a manager.


